What washer .. monobloc attaching
- Taid
- Posts: 710
- Joined: Mon Oct 07, 2019 3:35 pm
- Location: Shropshire UK
What washer .. monobloc attaching
Just about to replace the carb, after fitting new needle jet, and realized there are no washers for under the nuts.
The parts catalogue doesn't illustrate any, but does list PartNo. 000012.
What type of washer should be there please?
You do not have the required permissions to view the files attached to this post.
___
Now sold ... 1956 AJS 16MS Bitsa .. HSU 414 .. rebuilt/re-registered 1987
Now sold ... 1956 AJS 16MS Bitsa .. HSU 414 .. rebuilt/re-registered 1987
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: What washer .. monobloc attaching
Hi
000012 is a 1/4" standard plain washer.
Regards Mick
000012 is a 1/4" standard plain washer.
Regards Mick
- Taid
- Posts: 710
- Joined: Mon Oct 07, 2019 3:35 pm
- Location: Shropshire UK
Re: What washer .. monobloc attaching
Thanks, yet again, M..Mick D wrote:Hi
000012 is a 1/4" standard plain washer.
Regards Mick
Must have a hunt through my junk ..
T
___
Now sold ... 1956 AJS 16MS Bitsa .. HSU 414 .. rebuilt/re-registered 1987
Now sold ... 1956 AJS 16MS Bitsa .. HSU 414 .. rebuilt/re-registered 1987