Page 3 of 3
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 9:38 am
by ajscomboman
ajscomboman wrote: ?Fri Jul 22, 2022 8:23 pm
I'd have said more around 125psi is very healthy.
Spriddler replied
I could probably achieve that as well if I ate more pies. (But I wouldn't be very healthy).
Cheeky little lightweight!!!!!
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 11:15 am
by SPRIDDLER
Yep.
Stow-on-the-Wold Jampot rally........
10 stone wringing wet..JPG
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 11:55 am
by clive
As one of the moderators I feel compelled to issue a formal Warning to Spriddler about posting indecent photos.
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 3:01 pm
by spookefoote1956
And yet strangely hypnotic
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 4:58 pm
by spookefoote1956
Youtube Dave popped round and we did a compression test. 40 psi ooer! Dropped a little oil down the plug hole and got it to 100+ psi and it stayed there. It appears the rings needed a bit of lube to seal them. I know the rings are in good condition as I had the barrel off recently. Could be I didn't oil the barrel enough when I put it back on. Tomorrow is going to be a good day.
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 5:27 pm
by SPRIDDLER
spookefoote1956 wrote: ↑Sat Jul 23, 2022 4:58 pm
Dropped a little oil down the plug hole and got it to 100+ psi and it stayed there............Could be I didn't oil the barrel enough when I put it back on.
Tomorrow is going to be a good day.
Tip:
Take a plug spanner and a drop of oil out with you.
Re: Mag Timing Sequence
Posted: Sat Jul 23, 2022 6:16 pm
by spookefoote1956
Will do Nev