clutch actuating lever fouling g/box filler cap

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Post Reply
jerry
Member
Posts: 21
Joined: Fri Jul 14, 2006 9:00 am
Location: WILSHIRE UK

Re: clutch actuating lever fouling g/box filler cap

Post by jerry »

I've finally solved the problem after weeks of frustration. The clutch actuation lever was 180 degrees out. The PO obviously did it, maybe to compensate for the wear in the old pushrod? Thanks to everyone for your help. It still needs putting back together.
Top
Steve
Member
Posts: 241
Joined: Mon Aug 16, 2021 3:11 pm
Location: Isle Of Wight UK

Re: clutch actuating lever fouling g/box filler cap

Post by Steve »

Well done sorting it out, like most things once you find the answer you wonder how it took so long to find it. And the answer is usually right in front of you all the time. :thumbup:
Top
jerry
Member
Posts: 21
Joined: Fri Jul 14, 2006 9:00 am
Location: WILSHIRE UK

Re: clutch actuating lever fouling g/box filler cap

Post by jerry »

Steve wrote: ↑Mon Sep 04, 2023 7:31 pm Well done sorting it out, like most things once you find the answer you wonder how it took so long to find it. And the answer is usually right in front of you all the time. :thumbup:
You are so right and I knew it all along but it doesn't help see the obvious😂
Top
Post Reply

Return to “G3 / Model 16”