Clutch
-
- Member
- Posts: 8579
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Clutch
Several firms will bond new lining onto your plates.
Saftek is just one............
https://saftek.co.uk/friction-products- ... lications/
Saftek is just one............
https://saftek.co.uk/friction-products- ... lications/
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Posts: 14
- Joined: Mon Sep 11, 2023 8:49 pm
- Location: Essex England
Re: Clutch
Excellent thanks Spriddler, I'll get in touch.
-
- Member
- Posts: 1602
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Clutch
while im sure its possible , the tangs on the friction plates usually wear causing sticking . id buy new ones unless its prewar with cork inserts when you can get recorked
-
- Posts: 14
- Joined: Mon Sep 11, 2023 8:49 pm
- Location: Essex England
Re: Clutch
What are the tangs?
It's 1956, do you mean all new plates, friction and the non friction ones?
It's 1956, do you mean all new plates, friction and the non friction ones?
-
- Member
- Posts: 2164
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
Re: Clutch
+1 for that, along with the best clean up that can be done with the by-now-serrated hub and drum!
-
- Posts: 14
- Joined: Mon Sep 11, 2023 8:49 pm
- Location: Essex England
Re: Clutch
Thanks for all of your replies, much appreciated.
I have found these at feked.com but they are available in 3 different thicknesses. I've measured the ones that came off and they are 1.73mm. I expect mine are pretty worn given that the clutch is slipping very badly, what thickness would you recommend?
https://www.feked.com/bsa-ajs-matchless ... -3240.html
I have found these at feked.com but they are available in 3 different thicknesses. I've measured the ones that came off and they are 1.73mm. I expect mine are pretty worn given that the clutch is slipping very badly, what thickness would you recommend?
https://www.feked.com/bsa-ajs-matchless ... -3240.html
-
- Member
- Posts: 1602
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Clutch
if the steel plate are in good condition you dont need to replace then . check they are flat and free from burrs
friction plates are G-40-12 according to the spares book for 1956 Burman B52 box for members from our spares scheme
friction plates are G-40-12 according to the spares book for 1956 Burman B52 box for members from our spares scheme
-
- Posts: 14
- Joined: Mon Sep 11, 2023 8:49 pm
- Location: Essex England