Could anyone tell me the length of the footrest bar that goes through the frame and holds the rear brake pedal and pillion footrests?
Thanks
Footrest Bar
-
- Member
- Posts: 7
- Joined: Sun Dec 17, 2023 6:36 pm
- Location: Leicestershire
-
- Member
- Posts: 194
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: Footrest Bar
042446 Rod 9 -3/8 x 1/2 - thread 5/8 x 7/16
-
- Member
- Posts: 7
- Joined: Sun Dec 17, 2023 6:36 pm
- Location: Leicestershire
Re: Footrest Bar
What happened to my post?
-
- Member
- Posts: 8577
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Footrest Bar
If you mean this one it's still there on my screen...............
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 7
- Joined: Sun Dec 17, 2023 6:36 pm
- Location: Leicestershire
Re: Footrest Bar
There was a post after that stating the information was not quite correct
- Eamonn
- Webmaster
- Posts: 2245
- Joined: Sun Jan 01, 1995 12:00 am
- Location: OXFORDSHIRE UK
- Contact:
Re: Footrest Bar
There appeared to be replication in the posted answers and so some entries were removed from the system.
The spares website (https://www.amoc-parts.com) gives the dimensional details as:
"lightweight Footrest Rod 9 1/2" Also Centre Stand Rod
7/16" square section. These are in bare steel so will require painting."
The spares website (https://www.amoc-parts.com) gives the dimensional details as:
"lightweight Footrest Rod 9 1/2" Also Centre Stand Rod
7/16" square section. These are in bare steel so will require painting."
Corners like a Lego man
-
- Member
- Posts: 194
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: Footrest Bar
I think the two bars have different dimensions, the one that was asked for was the rear one not the main footpeg bar...