Page 1 of 3

can anyone help me?

Posted: Sat Nov 10, 2007 8:10 pm
by 743GUO
Can you help me get my bike started?

I've had a G2 for 5 years but my inability to get it started is driving me mad. My local garage (Bob Missen's of Melksham, Wilsthire) have helped me before & MOTd it for years but have stopped doing these "old bikes"(!).

Battery is brand new & fully charged, sparking at plug, timing is about right, new petrol, no obvious carb blockages, contacts & plug correctly set. Don't know what else to do.

Last time it did work (6 months ago) there was blue smoke coming out. Does that sound like a gasket or piston rings? If oil is getting in the cylinder will that stop it starting?

If i can't get it started I'll have to sell it & buy some Jap crap. Such a shame - I love my "old thumper" but I need something that works.

Any advice would be welcome, a travelling mechanic would be even better - happy to pay a reasonable fee.

Glen Watson
mobile 0777 591 2841.


Edited by - 743GUO on 18 Nov 2007 10:14:51 PM

can anyone help me?

Posted: Sat Nov 10, 2007 8:11 pm
by itma
near you in wilts, PM on its way

can anyone help me?

Posted: Sat Nov 10, 2007 8:38 pm
by Biscuit
Good on yer Ken, keep us posted. (Please)

can anyone help me?

Posted: Sun Nov 11, 2007 1:07 am
by Circlip
Spark plugs and do all kinds of in-explanable things for no logical reason.

Seemingly defying its simplicity. along with plug caps-if you have one.

It could be that the bike is cursed and the sacrifice of a small fluffy animal within the vicinity of the engine at midnight is necessary.

This could be next door neighbours kids hamster for instance. ----Probably wont work but hey,- Tv is crap these days.

can anyone help me?

Posted: Sun Nov 11, 2007 8:36 am
by bag-o-nails
jap crap! jap crap!!!

dont you dare! just hang on for uncle ken
he will sort you out in no time
we wait with baited breath keep us informed of his visit

cheers b-o-n

can anyone help me?

Posted: Thu Nov 15, 2007 10:36 pm
by 56G80S
I wish you lots of luck with this, I enjoyed my 14CSR. Sir Clip could be right about spark plug which loses spark when under compression. But you've better help than me on the way.

I would, however, edit your post to remove the 'phone number. Not everyone who logs on are necessarily enthusiasts.

Although I've had terrific help and encouragement through these pages, there are possibly some non-enthusiasts who will read your post and might prove to be a nuisance?

Johnny B

can anyone help me?

Posted: Wed Nov 21, 2007 5:07 pm
by crawsue
It's been 10 days now----where is that bl*+ dy repair man,wouldn't wait that long for a Jap! Where is he,where is he,what's happening,the suspense is killing me.

can anyone help me?

Posted: Wed Nov 21, 2007 5:54 pm
by itma
Bloody repairman has made a house call, and decided that the patient needs to be dissected chez Itma this weekend.
A progress report will be posted on the gate. or an obituary, whichever is relevant.

can anyone help me?

Posted: Wed Nov 21, 2007 6:13 pm
by crawsue
Phewwwwww!!!

can anyone help me?

Posted: Sun Nov 25, 2007 11:27 am
by itma
can you spot the defect[s]?
ask not wot is the bell wot tolls, its the big-end making that clanging noise,


[IMG]http://i67.photobucket.com/albums/h314/ ... piston.jpg[/IMG]
[by the bye, apologies to all stocking top fans, I did not realise that when I emptied the photobucket, they vanished from the ether also]Edited by - itma on 26 Nov 2007 7:44:44 PMEdited by - itma on 26 Nov 2007 7:45:36 PM