swinging arm bushes

mikeydpippin · Post by **mikeydpippin** » Mon Feb 18, 2008 4:20 pm

Sorry if this has been repeated a few times i have looked over past posts,Today i have recieved my swinging arm bushes without the tube that is driven through them.I notice the bushes have a silver outer shell over the bronze bush.Is it a case of warming my original silver outer shells to remove them(the bronze bushes came out easily) and do i need to renew the tube.(the original is slightly rusted. I thought the tube was part of the set.I guess the bronze lip on the new bushes sits inside the eyes of the swinging arm against the frame.

Eamonn · Post by **Eamonn** » Mon Feb 18, 2008 5:58 pm

Have you searched the Technical Articles ?

Click here to one that may be useful

mikeydpippin · Post by **mikeydpippin** » Mon Feb 18, 2008 8:57 pm

Thanks Eamonn usefull Link,I have managed to remove old and push new bearings inner and outer into swinging arm,and i have ordered a new tube (£16) I thought the tube was included in the swinging arm kit complete (Silly me).
I will be heating the "bridge" and freezing the tube next,must get the wife to practice the run in from the freezer to the kitchen LOL.