General purpose topics/chat goes in here
TommoT
Member
Posts: 1602 Joined: Mon Jan 01, 1990 12:00 am
Location: DENMARK
Post
by TommoT » Fri Mar 28, 2008 10:33 am
Fibreglass tanks can be a bit tricky, as it is very difficult to judge the condition of the fibreglass from photos. If I were you I would request very clear and detailed photos or maybe look for a steel or aluminium tank.
TommoT
Ride Your Motorcycle As If Your Life Depended On It - Cos' It Does!
Lassenc
Posts: 306 Joined: Mon May 15, 2006 10:24 pm
Location: DENMARK
Post
by Lassenc » Fri Mar 28, 2008 10:40 am
It's just, this tank is comp. style, black, right state of patina, though the price seems to climb a bit now.
john
Posts: 330 Joined: Tue Feb 12, 2002 12:00 am
Location: GLOUCESTERSHIRE UK
Post
by john » Fri Mar 28, 2008 11:21 am
Sammy Miller has the same tank for £135 new.
Lassenc
Posts: 306 Joined: Mon May 15, 2006 10:24 pm
Location: DENMARK
Post
by Lassenc » Fri Mar 28, 2008 11:24 am
Got a link?
GSAX1
Member
Posts: 971 Joined: Wed Sep 14, 2005 1:00 am
Location: NORWAY
Post
by GSAX1 » Fri Mar 28, 2008 11:25 am
What are you going to do with the tank Lasse, if you are selling your bikes?
Lassenc
Posts: 306 Joined: Mon May 15, 2006 10:24 pm
Location: DENMARK
Post
by Lassenc » Fri Mar 28, 2008 11:27 am
I might as well improve it and make it easier to sell, not loosing money on it
Maybe I'll improve it so much that I keep it.
Found the link btw. out of stock, wrote them a mail
Biscuit
Deceased
Posts: 3924 Joined: Thu Jan 01, 1998 12:00 am
Location: KENT UK
Post
by Biscuit » Fri Mar 28, 2008 11:34 am
Being a cynical old sod, and having seen it all before, you will never get your money back on what you pay for the tank.
Lassenc
Posts: 306 Joined: Mon May 15, 2006 10:24 pm
Location: DENMARK
Post
by Lassenc » Fri Mar 28, 2008 11:35 am
But it might be easier to sell.
Remember the tank I have now has a huge dent and chipped paint.
This will be cheaper than a respray!Edited by - Lassenc on 28 Mar 2008 11:37:34 AM
bjork
Member
Posts: 1908 Joined: Wed Jan 01, 1997 12:00 am
Location: LEICESTERSHIRE UK
Location: Leicestershire
Post
by bjork » Fri Mar 28, 2008 12:08 pm
Hi lassenc,
before you buy it, check with Jim at JSL. Last time I was there he was negotiating the manufacture of new ones at an advantageous price!
Could be a safer move and even more attractive to prospective bike buyers.
Steve
Using yesterdays technology to create tomorrows problems today