350 HW wiring

Kaydee · Post by **Kaydee** » Mon Oct 06, 2008 8:45 pm

Hi wiring on my 59/60 350 AJS HW rebuild (alternator with seperate ign & light switches) in a sorry state. Converted at sometime to 12 volt with a zenner.Can anyone provide wiring diagram. Thanks

kernow kid · Post by **kernow kid** » Mon Oct 06, 2008 9:44 pm

HI, unfortunately, the 59 350 came from the factory as 6v, with the switched coils set up for the lighting side. My father has a 59 350, which we converted to 12v about 10 years back, using a new rectifier and a zener. The standard factory wiring diagram wont show the zener mod, and it depends on how nicely its been done. Are you looking for a '6v to 12v modded' wiring diagram?
Regards KK

Kaydee · Post by **Kaydee** » Tue Oct 07, 2008 9:14 pm

Hi KK Yes a 6 to 12 diagram would hopefully be beneficial & let me access what sort of job / botch has been made previously.I could then decide which way to go new loom etc or sort this one Ta Kaydee

mike.dowling · Post by **mike.dowling** » Wed Oct 08, 2008 9:47 am

mike.dowling · Post by **mike.dowling** » Wed Oct 08, 2008 9:52 am

Hi
I converted my 350 to 12 volts and also changed to capacitor ignition if you look in the archives at
http://www.mc-albion.dk/AMC/Technical/E ... v_gear.pdf That is the lucas service manual which shows various wiring diagrams.
I can recomend going to capacitor ignition as it does not need the battery to run and you still have lights but flickery.

Kaydee · Post by **Kaydee** » Thu Oct 09, 2008 9:14 pm

Hi Thanks Mike, Kaydee