50 years ago when I started my apprenticeship I was given a ZEUS chart
which contained all the thread details and drilling sizes for tapping.
Unfortunately over the years it became dog eared and fell to pieces
and now I need the information to do some repairs I dont know where to look has anybody any ideas of a web site that may have this information.
Regards
Mike.D.
Threads and drill sizes.
-
- Posts: 120
- Joined: Mon Aug 20, 2007 9:00 pm
- Location: BERKSHIRE UK
-
- Member
- Posts: 8567
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Threads and drill sizes.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- paul knapp
- Posts: 1645
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: SOUTH AUSTRALIA AUSTRALIA
Threads and drill sizes.
___“As a hobby for the technically minded, motorcycling provides great scope.”
J.B.Nicholson
Don't worry about the world coming to an end today. It's already tomorrow in Australia!
_____________________________________________
J.B.Nicholson
Don't worry about the world coming to an end today. It's already tomorrow in Australia!
_____________________________________________
- kernow kid
- Posts: 517
- Joined: Wed Feb 14, 2007 3:55 pm
- Location: CORNWALL UK
Threads and drill sizes.
HI,
try www.efunda.com and type in 'drill tap sizes' in the search box at the top of the page.
Regards KK
try www.efunda.com and type in 'drill tap sizes' in the search box at the top of the page.
Regards KK
Top tip - if it needs more than 2 bolts to hold it on, its probably important...
-
- Posts: 7
- Joined: Fri Sep 16, 2005 1:00 am
- Location: OXON UK
Threads and drill sizes.
Easy just get a nut the size of the thread you want to tap and find a drill that passes through the nut as snug as possible and thats your tapping size
- AJS650
- Posts: 700
- Joined: Sun Mar 02, 2008 5:23 pm
- Location: LINCS UK
Threads and drill sizes.
for gawd`s sake DO NOT GOOGLE "ZEUS SITE"...kev
Sometimes,, the shed is locked and Kev has the key
-
- Posts: 294
- Joined: Thu Sep 30, 2004 1:00 am
- Location: KENT UK
Threads and drill sizes.
I'm gonna have to Google it now, ain't I?
Brothers Matt & Neal with joint membership
- crawsue
- Posts: 1180
- Joined: Tue Apr 19, 2005 1:00 am
- Location: GLASGOW UK
Threads and drill sizes.
Had a look...well had to,really,havn't a bl43dy clue what it's about,but we did open another bottle of red last night
Hard work never killed anyone.....but why take the risk?
- MikeG
- Posts: 54
- Joined: Sat Jan 07, 2006 9:58 am
- Location: CLEVELAND UK
Threads and drill sizes.
Try this for BSW BSF and BA threads.
http://www.ring-plug-thread-gages.com/t ... arts8.html
http://www.ring-plug-thread-gages.com/t ... arts8.html