Page 1 of 2
Dynamos and Magnetos
Posted: Fri Oct 09, 2009 10:50 am
by rex.webb
I have used the services of
E.L, Salmons
35 Mill Road
Burnham-on Crouch
Essex.
I have foud an invoice dated 21-7-89 for the rebuilding of my 1924 AJS Magneto,they have also rebuilt my 1937 AJS Magneto and at least 10 other Dynamoes and Magnetoes for friends.
Dynamos and Magnetos
Posted: Fri Oct 09, 2009 3:41 pm
by Groily
Had a comp mag done by SRM, the Beesa people. Very good but not cheap. Have another with Dave Lindsley as I speak. Exchange armatures I get from SRM too as they do an immediate swap if your old one's OK, then Independent Ignition Supplies for the small bits, bearings etc. For dynamos, same plus Hawker, Feked, Britbits, etc depending who's got what on a given day.
Dynamos and Magnetos
Posted: Sat Oct 10, 2009 8:19 am
by Eamonn
Weblinks :
S.R.M. - based in Ceredigion, Wales
Independent Ignition Supplies - Bideford, N.Devon
Sean Hawker - Bristol, Avon
Dynamos and Magnetos
Posted: Sat Apr 17, 2010 8:47 pm
by G15 Roy
I have used Paul Many times with gerat service and help.
Dynamos. 8 Perthy Grove Trentham Stoke-on-Trent ST4 8PE. Tel: 01782 856839. Sales and Repairs. Contact: Paul Dunn ...
Dynamos and Magnetos
Posted: Sun Apr 18, 2010 10:34 am
by petert120r
also APL Magnetos (advertise OBM) does dymanos as well
Dynamos and Magnetos
Posted: Sun Apr 18, 2010 11:07 am
by A Moderator
petert120r have you actually used APL Magnetos yourself for dynamos with good results?
Dynamos and Magnetos
Posted: Sun Apr 18, 2010 1:44 pm
by petert120r
Yes, a couple of times.
Dynamos and Magnetos
Posted: Sat Jul 10, 2010 11:59 am
by GOLDSTAR
Phoned Dave Lindsley yesterday morning at 09.30 requesting an amature, brushes and a bearing for my dynamo, he stated he had just moved premises and couldn't post it until Wednesday next, asked me when I needed it replied 'yesterday',said he'd do what he could, goods turned up this morning 24 hours! That's good service in anyones book, thanks Dave,
kind regards
Dynamos and Magnetos
Posted: Thu Sep 30, 2010 8:54 pm
by Phil Diment
I can recommend Paul Dunn -sent him a very battered E3L for overhaul; telephone call from Paul on the day it arrived; dynamo overhauled and sent back within 10 days; looks and works as new and at cheaper than his original quote!
Dynamos and Magnetos
Posted: Mon Feb 21, 2011 6:37 pm
by Tommy RE
Just bought a rebuilt E3N Dynamo for my 1940 G3 (originally fitted with an E3AR, but these are as rare as rocking horse pooh) from Paul Dunn absolutely excellent workmanship dyno now charges like a goodun cost me £160.00 which was a damned sight less than my abortive bid for an E3AR in need of a lot of TLC from over the pond. Can't recommend him highly enough