Rockers 500 twin
-
- Posts: 17
- Joined: Tue Jun 29, 2010 11:42 am
- Location: Ulstadveien 45 A NORWAY
Rockers 500 twin
Hi i have a G9 52 mod 500 twin i been fixing the engine on, but 2 off my rockers have been bendt, part number 014285-014284 do anyone now where
i can bye this one new ?
i can bye this one new ?
Per Åge Skorstad
-
- Posts: 336
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: OXON UK
Rockers 500 twin
Try JSL ,if they dont have new/reconditioned ones they probably have some second-hand ones.
Ian
Ian
-
- Posts: 17
- Joined: Tue Jun 29, 2010 11:42 am
- Location: Ulstadveien 45 A NORWAY
- stevie
- Posts: 371
- Joined: Wed Nov 14, 2007 10:59 pm
- Location: HERTS UK
Rockers 500 twin
Hi Per,
you could also try AMC Classic Spares they have loads of second hand stock.
Yes, Ian did mean Jampot Spares Ltd.
you could also try AMC Classic Spares they have loads of second hand stock.
Yes, Ian did mean Jampot Spares Ltd.
If a man speaks in the forest and his wife is not there to hear him is he still wrong?
-
- Posts: 17
- Joined: Tue Jun 29, 2010 11:42 am
- Location: Ulstadveien 45 A NORWAY
- GSAX1
- Member
- Posts: 971
- Joined: Wed Sep 14, 2005 1:00 am
- Location: NORWAY
Rockers 500 twin
Hi, and welcome
I would investigate why/how they have been bent, to my knowledge this is not a common occurence...
Michael
I would investigate why/how they have been bent, to my knowledge this is not a common occurence...
Michael
- 1608
- Member
- Posts: 2496
- Joined: Mon Oct 05, 2009 1:00 am
- Location: ESSEX UK
Rockers 500 twin
If the rockers were bent when engine was running I'd be very surprised if there isn't damage to push rods or possibly valves.To bend rockers, which I thought were cast, something must have made contact which shouldn't have due to incorrect valve timing etc.
-
- Member
- Posts: 1221
- Joined: Fri Jan 01, 1993 12:00 am
- Location: WEST MIDLANDS UK
Rockers 500 twin
I think the rockers are steel forgings probably of fairly high grade material so they can be locally hardened on the heel or pad that makes contact with the valve stem.
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
Rockers 500 twin
just on ebay
seller has more than, one claims new
http://cgi.ebay.co.uk/AMC-AJS-MATCHLESS ... 41519fbd99
seller has more than, one claims new
http://cgi.ebay.co.uk/AMC-AJS-MATCHLESS ... 41519fbd99
-
- Posts: 17
- Joined: Tue Jun 29, 2010 11:42 am
- Location: Ulstadveien 45 A NORWAY
Rockers 500 twin
The valves has been eating in the valve seat sow mucht that they suddenly came in contact with the rockers. Two off the rockers-push rod have been bend.
This happend after a ride over 2 hours,but i did,nt realy now the engines condition. The bike hasn,t realy been on the road for 10 years.
I have now sendt the top too an expert in norway for new valves and seat, i took the cylinder off too, for bying new piston rings but my cylinder measure 67,55mm. Should i by +60 ? And do the rockers fit my enginges when the parts number don,t match.?
This happend after a ride over 2 hours,but i did,nt realy now the engines condition. The bike hasn,t realy been on the road for 10 years.
I have now sendt the top too an expert in norway for new valves and seat, i took the cylinder off too, for bying new piston rings but my cylinder measure 67,55mm. Should i by +60 ? And do the rockers fit my enginges when the parts number don,t match.?
Per Åge Skorstad