Tap & Die Sets

Eric · Post by **Eric** » Sun Jan 23, 2011 8:05 am

Cant help with the thread for grease nipples.

But don't try to use the headstock ones, all you will do over many years is fill the frame with grease. Why they were ever there in the first place I don't know they do not add grease to the headstock bearing races.

The ones on the hubs should be used very cautiously as over use can contaminate brake linings. Properly greased wheel bearings done when the hubs are dismantled for overhaul should last until they are overhauled again.

The speedo gearbox is a differnt nipple and the occasional use of a simple hand gun is all thats required.

Samuel · Post by **Samuel** » Mon Jan 24, 2011 5:28 pm

quote:
MAX-T Engineering website for BSC stuff is here:
http://www.max-t.co.uk/tapsAndDies/26TPIBSCYHSS.html

My internet security (TREND) reports this site as potentially malicious !

Don Madden · Post by **Don Madden** » Mon Jan 24, 2011 6:19 pm

I had the same warning with one of my computers but not the backup computer. I also had other similar issues but a complete restore from my backup drive fixed everything. I suspect malware & you do have a full backup file, don't you? Don't you? Cheers, Don.