Page 1 of 1
gearbox
Posted: Fri Feb 24, 2012 4:57 pm
by lovemotorbikes
crikey,having a right time with this little box, got many print out strip and rebuild sheets from the forum etc, and still cant figure out the selector forks and the kickstart rachet,...there are 3 teeth on the side of the rachet gear and i,m lost aarrgh!!!!!!,regards dave
gearbox
Posted: Fri Feb 24, 2012 8:23 pm
by cbranni
Hi Dave...............I can see you're having issues, I have a couple of gearboxes lurking somewhere do you want to pull the end cover off and take some photos of the selector forks and kickstart set up.
I cant do it till Sunday though, am going to spray my tanks and toolbox tomorrow come hell or highwater.
Colin
gearbox
Posted: Sat Feb 25, 2012 9:36 am
by lovemotorbikes
that would be great, problem i have is got every thing in bits when i bought, so its been a jigsaw, ha ha !!,usually i ref mark stuff as i strip it,thanks again, regards dave
gearbox
Posted: Sat Feb 25, 2012 10:21 am
by mike.dowling
Hi
I rebuilt my gearbox using this artical from the archives and had no trouble, is this the one youve been using.
http://archives.jampot.dk/Technical/Tra ... ebuild.pdf
Regards
Mike d.
gearbox
Posted: Sun Feb 26, 2012 2:56 pm
by lovemotorbikes
turns out i am also couple parts missing, selector quadrant circlip, and selector shaft shim, doh!!!regards dave