Burman Gear Boxes
-
- Posts: 2337
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: victoria AUSTRALIA
Burman Gear Boxes
Time to pull the outer cover off, make sure there is a little endplay on layshaft and mainshaft or they will bind.I had to make a gasket for the inner case a little thicker than normal to attain end play on the last rebuild.
-
- Posts: 2
- Joined: Fri Aug 24, 2012 7:48 am
- Location: India INDIA
Burman Gear Boxes
Thank you for your advice.
I will cut new gaskets for both the
inner and outer compartments and
allow some endplay for both the shafts
I will cut new gaskets for both the
inner and outer compartments and
allow some endplay for both the shafts