When I had trouble with the crankcase fitted valve lifter on my 1948 500 a while back I realised that the tappet collar which fits on the exhaust valve tappet was missing. I now have the engine stripped and this is an opportunity to replace the collar. Unfortunately I can't find this item listed on the JSL, AMC or Andrews parts lists. Old part number STD 638.
Can anyone suggest where I might obtain one or possible provide dimensions in the hope I could get one made up.
Any suggestions welcome. Thanks
barry
Valve Lifter Tappet Collar
-
- Member
- Posts: 90
- Joined: Sat Oct 16, 2010 8:55 pm
- Location: HANTS UK
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Valve Lifter Tappet Collar
the new pt. no. will be 000638
-
- Member
- Posts: 90
- Joined: Sat Oct 16, 2010 8:55 pm
- Location: HANTS UK
Valve Lifter Tappet Collar
Thanks for the new part number. I have managed to get a collar from Russell Motors, very helpful and knowledgable people.
I have an old and new spares list but presumably there is a conversion list for old/new part numbers available somewhere?
I have an old and new spares list but presumably there is a conversion list for old/new part numbers available somewhere?
-
- Member
- Posts: 8560
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Valve Lifter Tappet Collar
quote:
I have an old and new spares list but presumably there is a conversion list for old/new part numbers available somewhere?
Here:
http://archives.jampot.dk/Book/Spares_l ... n_List.pdf
I have an old and new spares list but presumably there is a conversion list for old/new part numbers available somewhere?
Here:
http://archives.jampot.dk/Book/Spares_l ... n_List.pdf
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 90
- Joined: Sat Oct 16, 2010 8:55 pm
- Location: HANTS UK
Valve Lifter Tappet Collar
Thanks, that's brilliant.