quote:
Hi John and Richard,
The best people for parts in Australia, Bert Flood Imports for Rotax parts, Jim Eades in Ashfield Nsw and Union Jack in Melbourne they all have odd bits. Also have found American Dirt Bike (Keith Fearing) invaluable with help for the parts for the electric start kit. He was the only one who got back to me with a comprehensive list of parts numbers and names...How are your bikes going anyway?
regards Jojo
Harris G80
-
- Posts: 12
- Joined: Fri Jan 04, 2008 10:17 am
- Location: Victoria AUSTRALIA
-
- Posts: 12
- Joined: Fri Jan 04, 2008 10:17 am
- Location: Victoria AUSTRALIA
Harris G80
Hi John and JoJo,
Jo,
I'm wondering how your electric start project is going?
John,
Did you get an instrument panel. Phil at Union Jack thinks they are available. About $60 Aus. He imports direct from Harris in Devon.
Regards-Richard
Jo,
I'm wondering how your electric start project is going?
John,
Did you get an instrument panel. Phil at Union Jack thinks they are available. About $60 Aus. He imports direct from Harris in Devon.
Regards-Richard
-
- Posts: 353
- Joined: Sun Oct 15, 2006 5:12 pm
- Location: UK
Harris G80
Hi Richard,
no not yet I will try Union jack.
Funny that, a UK dealer who reckons to know Les Harris says they are not avilable now.
Good result in Bejing!!??
Regards,
John
no not yet I will try Union jack.
Funny that, a UK dealer who reckons to know Les Harris says they are not avilable now.
Good result in Bejing!!??
Regards,
John
-
- Posts: 12
- Joined: Fri Jan 04, 2008 10:17 am
- Location: Victoria AUSTRALIA
Harris G80
Jon,
Do you want me to ask Phil?
I've got some side stand springs to pick up from him.
Each gold medal cost Aus taxpayers $17,000,000.
Good result-don't know.
Cheers
Richard
Do you want me to ask Phil?
I've got some side stand springs to pick up from him.
Each gold medal cost Aus taxpayers $17,000,000.
Good result-don't know.
Cheers
Richard
-
- Posts: 353
- Joined: Sun Oct 15, 2006 5:12 pm
- Location: UK
Harris G80
Richard,
thanks yes.
I was taking the p**s about medals, you know one up to the poms!
John
thanks yes.
I was taking the p**s about medals, you know one up to the poms!
John
-
- Posts: 12
- Joined: Fri Jan 04, 2008 10:17 am
- Location: Victoria AUSTRALIA
Harris G80
Hi John,
I knew that.
Personally the whole things a bit over rated these days.
Cheers
Richard
I knew that.
Personally the whole things a bit over rated these days.
Cheers
Richard
-
- Posts: 353
- Joined: Sun Oct 15, 2006 5:12 pm
- Location: UK
Harris G80
Hi Richard and Jo Jo,
How are the bikes going?
Had a scare this weekend, I started getting a flat spot so thought I would check the carb out. I was expecting a nightmare getting the airbox off, and found a large hole under the inlet flange. Any way Harris still stock them so that should sort it
John
How are the bikes going?
Had a scare this weekend, I started getting a flat spot so thought I would check the carb out. I was expecting a nightmare getting the airbox off, and found a large hole under the inlet flange. Any way Harris still stock them so that should sort it
John